Fitting our Radius Cup Guards

It's best to do one guard at a time, remove the original bolt from the Jimny radius arm mount, slide the correct guard halfway up and drop between the guard and the original mounting bracket, 1 x washer per side. Then add 1 washer to the bolt and carefully pass through the guard and mounting bracket. Leave the bolts loose at this stage with the nuts fitted.

So you will have the following order:

Bolt - Washer - Guard - Washer - Chassis Bracket - Bush - Chassis Bracket - Washer - Guard - Washer - Nylock Nut.

Repeat this for the remaining brackets.

Lower the car to the ground sitting on its wheels so the bushes are relaxed, and torque to 54ft/lb.