Description
xDesigned to fit Ford Ranger Raptor (2019+)
ST1K 21.5 INCH E-MARK LED LIGHT BAR
- 20 x 5W OSRAM LEDs
- RFI and EMI suppression circuit. Guaranteed to not interfere with Radio or GPS Equipment
- IP68 - Submersible to 3m
- Environmentally sealed Deutsch DT-2 connectors
- Innovative hooded optics
- Driving Beam E mark compliant beam.
- Heavy Duty Adjustable Bottom Mounts & Side bracket included.
- Reverse Polarity Protected Circuit (RPPC)
- Electronic Thermal Management
- Built-in Voltage Surge Protection
INCLUDES: Our high current Easy-Fit Plug & Play Wiring Harness. (Switch, Fuse, Relay HB3 and H4 high-beam piggy back adaptors)
FORD RANGER RAPTOR INNER GRILL LIGHT MOUNT
Manufactured with 3mm Stainless Steel, and designed to be fastened to pre-existing holes which are already present on the inner side of the front grille. This is a completely non-intrusive install meaning that no new holes need to be made, nor do sections of the front bumper need any cutting or modifying.
The end result is a very robust, stealth installation.
- Stainless Steel
- Designed to minimize disruption of air-flow
- No need to remove front bumper
- Bolts to pre-existing holes
- No drilling required, bolt and nut kit included
EFFORTLESS INSTALLATION
Unparalleled attention to details and the very best materials come together to achieve a visually striking yet stealth design which embodies STEDI’s signature throughout. Included is a pair of laser cut 304 series stainless steel brackets, designed to be fastened to existing provisions found in behind the inner Raptor grill using the supplied self-tapping screws. The result is a covert, robust and secure DIY install.
WHAT'S INCLUDED
- ST3K 21.5inch LED LIGHT BAR
- Stainless Fasteners
- Stainless Steel Side Mounting Brackets
- 12v Quick Fit to High Beam Wiring, Relay, Wiring Kit, and round universal On/Off Switch
- H4 and HB3 adapters included
- Wiring Instructions
- Ford Ranger Raptor Inner Grill Mounting Brackets
- Inner Grill Mounting Hardware
- 1 x Ford Ranger High beam Adapter
TECH SPECS
ST3K 21.5 inch 20 LED Slim LED Light Bar
| LED | 20 x Osram Oslon White |
| Effective Lumen | 4,100Lm |
| Peak Intensity | 243,200cd |
| Operating Voltage | 10-30V DC |
| IP Rating | IP68 |
| Current Draw | 4.3A @ 13.5v |
| Colour Temperature (CCT) | 5700 Kelvin |
| Housing Material | Aluminium Extrusion & Cast |
| Lens | GE™ Lexan |
| Mounting Bracket | Powder Coated 3mm Stainless Steel |
| Bolts and FIttings | 3 Series Stainless Steel |
| Beam Type | Flood Spot Combo |
| Life Span | 50,000 Hours |
| Weight | 1.855 |
| Operating Environment | -40°c - +50°c |
| PHOTOMETRIC DATA | |
| 10 M | 2,430 Lx |
| 50 M | 97 Lx |
| 100 M | 24 Lx |
| 200 M | 6 Lx |
| 493 M | 1 Lx |
- Choosing a selection results in a full page refresh.