-
Stedi Short Type Push Switch to suit Suzuki / Toyota / Mitsubishi
Short Type Push Switch To Suit Toyota KEY FEATURES Blue LED Back Lighting Upper Light is Active when Power is ON Lower Light is Active when Dash Lights are ON Laser Etched print ensure our print will never rub off with use Rated at 3A...- $32.45
- $32.45
- Unit price
- per
-
Stedi Square Type Push Switches
The Stedi square 22 x 22mm Push latching type switch designed for the new incoming Toyota models like the Toyota Land Cruiser Prado (GDJ150R, second face-lift. These switches fit the Stedi Switch Panel for Ranger/Raptor/Everest perfectly. KEY FEATURES Ice Blue LED Back Lighting - Exact...- From $5.50
- From $5.50
- Unit price
- per
-
Ford Ranger Raptor & Everest Piggy Back Adaptor
The STEDI Quick-Fit high beam piggy back adaptor is designed specificially to fit the PX2, PX3 Ford Ranger, Ford Ranger Raptor & Ford Everest all models. The above named vehicles high beam bulbs resides inside of a sealed rigid dust-cap, therefore using traditional pass-through...- $39.75
- $39.75
- Unit price
- per
-
Stedi LED Work Light Wiring Kit Loom Harness (Not high beam triggered)
It contains everything you need to get your lights connected. Press button ON/OFF switch. The included relay is rated to 40A so you can use the one wiring kit to connect several light bars to the one wiring loom. Featuring a total of 4.8...- $42.75
- $42.75
- Unit price
- per
-
Stedi Tall Type Switches to suit Toyota
Our range of Old Style Toyota Push Switches maintain the factory look and feel of your vehicle with a wide variety of prints from LED Light Bars & Air Compressors to Diff Locks and much more. Our OEM Push Switches have dual illumination lighting...- From $27.50
- From $27.50
- Unit price
- per
-
Stedi Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring
The Dual Output Quick Fit SMART Harness™ from Stedi is the ultimate solution for easy and efficient installation of your driving lights. This all-in-one wiring loom features high current 10AWG cable, is compatible with negative switching, and includes a waterproof switch and DTP to...- $74.50
- $74.50
- Unit price
- per
-
Stedi Suzuki Jimny (JB64W/JB74W) Piggy Back Adaptor
Specifically designed to suit the Suzuki Jimny (JB64W/JB74W). The easy solution for wiring up your Driving Lights to work on high beam with no need for splicing, trapping or soldering as it is a direct Plug & Play install. Designed to work with all STEDI...- $39.75
- $39.75
- Unit price
- per
-
Stedi N80 Hilux Bi-LED High Beam Adaptor
Specifically designed to suit the Toyota Hilux (N80) with factory Bi-LED Headlight ONLY. The easy solution for wiring up your Driving Lights with no need for splicing, trapping, or soldering as it is a direct Plug & Play install. Designed to work with all...- $39.75
- $39.75
- Unit price
- per
-
Stedi 2 to 1 Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m
The Stedi 2 to 1 Deutsch Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT2 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our...- $29.75
- $29.75
- Unit price
- per
-
Stedi 2.0m Wiring Extension cable
2.0m Wiring Extension cable Deutsch Connectors | STEDI Light Harness 2.0m Extension Cable compatible with all wiring kits fitted with the Deutsch sealed DT and DTP connectors. Stedi generally use the smaller Deutsch DT connector for all light bars up to and including 200w,...- $27.55
- $27.55
- Unit price
- per
-
Stedi Switch Panel to suit Ford Ranger Mk2 and Mk3 Raptor and Everest
STEDI all-new Ford switch fascia to suit the Ford Ranger PX2, PX3, Ranger Raptor and Everest (2015 - 2019), effortlessly solves the lack of switch blanks in the aforementioned Ford models. The STEDI switch panel requires no modification whatsoever to the original dash. Unlike...- $95.50
- $95.50
- Unit price
- per
-
Stedi Tall Type Push Switch for Nissan
Suited to fit Nissan Navara NP300 (2015+ models in front of cupholder), Navara D40 (2008 - 2014 models), Pathfinder R51 (2005 - 2012 models), Patrol Y61/Y62 (2013+ models) & X-Trail T30/T31 (2000 - 2013 models). Available in 5 variants of print to replace blank...- $24.50
- $24.50
- Unit price
- per
-
Holden Colorado, Colorado 7 RG & Trailblazer Piggy Back Adaptor
Specifically designed to suit the Holden Colorado, Colorado 7 RG (2012+) & Trailblazer models. The easy solution for wiring up your Driving Lights with no need for splicing, tapping, or soldering as it is a direct Plug & Play install. Designed to work with...- $39.75
- $39.75
- Unit price
- per
-
Stedi Push Switch To Suit Toyota 80 Series Landcruiser
Our range of 80 Series Landcruiser Toyota Push Switches maintains the factory look and feel of your vehicle with a wide variety of prints from LED Light Bars, Driving Lights, and Rear Lights. Our OEM Push Switches have dual illumination lighting up the right...- $36.75
- $36.75
- Unit price
- per
-
Stedi Push Switch for D-Max/Colorado (2012-2020)
Suited to fit Isuzu DMAX & Holden Colorado models (2012+). Available in 4 variants of print to replace blank switches in the cabin. LED Light Bar, Driving Lights, Rear Lights and STEDI Universal prints are available. Simple On/Off function with dash & power illumination,...- $27.50
- $27.50
- Unit price
- per
-
Stedi H4 CANBUS Cancellation Module (Pair)
The Stedi H4 Canbus Error Cancellation Module will prevent dash warning lights when upgrading to LED or HID. These can also be used to resolve the polarity issue when upgrading headlamps on negatively switched vehicles. How do I determine whether I need the CANBUS...- $47.50
- $47.50
- Unit price
- per
-
Stedi Push Switch for D-Max/BT-50 (For MU-X, D-MAX, BT50)
Push Switch To Suit D-Max/BT-50 COMPATIBLE VEHICLES: Isuzu D-Max (post-August, 2020, RG) Isuzu MU-X (post-July, 2021) Mazda BT50 (2021, TF)- $29.50
- $29.50
- Unit price
- per
-
Stedi Mitsubishi Triton MR LED Headlight Piggy Back Adaptor
Specifically designed to suit the Mitsubishi MR Triton models with LED or Halogen Headlights. The easy solution for wiring up your Driving Lights with no need for splicing, trapping or soldering as it is a direct Plug & Play install. Designed to work with...- $35.75
- $35.75
- Unit price
- per
-
Stedi Nissan Navara NP300 Plug and Play Wiring Harness Kit
The Nissan Navara NP300 community know all too well the headaches involved in trying to trigger driving lights off of the high beam of the NP300 fitted with factory LED headlights. Blown headlight modules are just some of the problems you're likely to encounter. ...- $84.25
- $84.25
- Unit price
- per
-
Stedi Switch Quick Plug & Play Connector (Other)
Switch Quick Plug & Play Connector Compatible with the following switch types: Short Type Push Switch To Suit Toyota Short Type Push Switch To Suit Suzuki Push Switch To Suit D-Max/BT-50 Short Type Push Switch To Suit Mitsubishi Tall Type Push Switch To...- $17.55
- $17.55
- Unit price
- per
- Choosing a selection results in a full page refresh.