Stedi Lights
Premium quality LED light bars, spotlights, work lights, brackets, switches, and wiring. Australia's biggest range of high-quality automotive & marine LED lights & accessories.
-
Stedi Short Type Push Switch to suit Suzuki / Toyota / Mitsubishi
Short Type Push Switch To Suit Toyota KEY FEATURES Blue LED Back Lighting Upper Light is Active when Power is ON Lower Light is Active when Dash Lights are ON Laser Etched print ensure our print will never rub off with use Rated at 3A...- $32.45
- $32.45
- Unit price
- per
-
Stedi Square Type Push Switches
The Stedi square 22 x 22mm Push latching type switch designed for the new incoming Toyota models like the Toyota Land Cruiser Prado (GDJ150R, second face-lift. These switches fit the Stedi Switch Panel for Ranger/Raptor/Everest perfectly. KEY FEATURES Ice Blue LED Back Lighting - Exact...- From $5.50
- From $5.50
- Unit price
- per
-
Stedi Type X Pro LED Driving Lights
Introducing the Type-X Pro, the ultimate LED spotlight for the uncompromising individual. Designed for those who demand the best in performance and durability, the Type-X Pro is the epitome of cutting edge technology. Equipped with 37 x Oslon High-Flux LEDs, it has the...- $927.50
- $927.50
- Unit price
- per
-
Ford Ranger Raptor & Everest Piggy Back Adaptor
The STEDI Quick-Fit high beam piggy back adaptor is designed specificially to fit the PX2, PX3 Ford Ranger, Ford Ranger Raptor & Ford Everest all models. The above named vehicles high beam bulbs resides inside of a sealed rigid dust-cap, therefore using traditional pass-through...- $39.75
- $39.75
- Unit price
- per
-
Stedi LED Work Light Wiring Kit Loom Harness (Not high beam triggered)
It contains everything you need to get your lights connected. Press button ON/OFF switch. The included relay is rated to 40A so you can use the one wiring kit to connect several light bars to the one wiring loom. Featuring a total of 4.8...- $42.75
- $42.75
- Unit price
- per
-
Stedi 1,000 Lumen T20 Reverse LED Upgrade (pair)
These are the perfect bulbs for turning your dull old reverse lights on your Suzuki Jimny into floodlights, these make life much easier! Perfect for many other vehicles, too. STEDI has, yet again, endeavoured to prove that halogens fall short compared to the brilliance...- $74.50
- $74.50
- Unit price
- per
-
Stedi Tall Type Switches to suit Toyota
Our range of Old Style Toyota Push Switches maintain the factory look and feel of your vehicle with a wide variety of prints from LED Light Bars & Air Compressors to Diff Locks and much more. Our OEM Push Switches have dual illumination lighting...- From $27.50
- From $27.50
- Unit price
- per
-
Stedi 7" TYPE-X™ Sport Spot Lights
Say hello to the all-new 7" Type-X Sport; our most affordable driving light yet, with the inherently STEDI ability to deliver a high-performance and high-quality driving illuminance. Simply look at the build quality and performance from other offerings on the market and you will...- $550.00
- $550.00
- Unit price
- per
-
Stedi Type X 8.5" Pro and Sport Cover
Replacement cover for STEDI 8.5 Inch TYPE-X LED Driving Lights Available in the following styles: Smiley STEDI Logo Transparent Blue Transparent Green Transparent Yellow Clear Blood Splatter Carbon print Flood Snow Camouflage Stencil Outline Please Note: These covers are specifically designed to fit the...- $24.50
- $24.50
- Unit price
- per
-
Stedi Dual Connector Plug & Play SMART Harness™ High Beam Driving Light Wiring
The Dual Output Quick Fit SMART Harness™ from Stedi is the ultimate solution for easy and efficient installation of your driving lights. This all-in-one wiring loom features high current 10AWG cable, is compatible with negative switching, and includes a waterproof switch and DTP to...- $74.50
- $74.50
- Unit price
- per
-
Stedi Suzuki Jimny (JB64W/JB74W) Piggy Back Adaptor
Specifically designed to suit the Suzuki Jimny (JB64W/JB74W). The easy solution for wiring up your Driving Lights to work on high beam with no need for splicing, trapping or soldering as it is a direct Plug & Play install. Designed to work with all STEDI...- $39.75
- $39.75
- Unit price
- per
-
Stedi Bull Bar Mounting Brackets | Black
The STEDI Tube Clamp Bull Bar Brackets offer a stable mounting platform for bullbars that are not fitted with tabs for UHF Antennas and LED lights. Made from cast aluminium with stainless steel fasteners keeping it strong yet lightweight as well as a polyester...- From $32.50
- From $32.50
- Unit price
- per
-
Stedi T20 (7440, 7443) Wedge LED Bulbs (Pair)
Perfect for the brake/tail lights on the Suzuki Jimny, to replace the standard bulbs. Our T20's use a 5700k temperature for a whiter/modern look that will have an increased performance over the factory halogen bulbs. Our STEDI Copperheads headlight conversions also run 5700k which...- $39.75
- $39.75
- Unit price
- per
-
Stedi N80 Hilux Bi-LED High Beam Adaptor
Specifically designed to suit the Toyota Hilux (N80) with factory Bi-LED Headlight ONLY. The easy solution for wiring up your Driving Lights with no need for splicing, trapping, or soldering as it is a direct Plug & Play install. Designed to work with all...- $39.75
- $39.75
- Unit price
- per
-
Stedi Surface 5700k LED Rock Light
Auxiliary reverse assist, caravan, ute canopies, toolboxes or camper trailers. The ultra-wide emitting angle makes our LED ROCK lights the most versatile product in our entire range. Each STEDI LED Rock light draws a tiny 0.4 amp, yet produce 813 Lumens each. Making them...- $46.75
- $46.75
- Unit price
- per
-
Stedi C-4 Black Edition Cube Flood Light
Environmentally sealed and moulded Deutsch DT-2 connector with male wire tail included RFI and EMI suppressed circuity ensure no interference with sensitive radio equipment Fitted with Gore Breather Vent – Certified IP68 | Submersible to 3m 304 Series Stainless Steel Bracket and Fasteners Beam...- $114.75
- $114.75
- Unit price
- per
-
Stedi H4 LED Bulb Conversion
When looking for an easy option for better performing headlights for your vehicle our STEDI Copper Head conversion kits are a simple Plug & Play upgrade that is as simple as changing over a factory globe. On average most halogen 55W lamps will...- $169.50
- $169.50
- Unit price
- per
-
Stedi VICE Bull Bar Tube Clamps
The STEDI Vice Clamp Bull Bar Brackets will meet the versatile application when it comes to side mounted & certain lower mounted LED light Bars. Made from cast aluminium with stainless steel fasteners keeping it strong yet light weight as well as a polyester...- From $38.50
- From $38.50
- Unit price
- per
-
Stedi Universal Type A LED Fog Light Conversion Kit
If you're looking for an OEM like LED upgrade, look no further down our Type A fog light which has mounting brackets to suit a wide range of factory fog lamp housing. The projector lens optic distributes a very flat and extremely wide pattern...- $182.50
- $182.50
- Unit price
- per
-
Stedi 2 to 1 Connector / Splitter | 2 Lights with 1 Wiring Harness 1.5m
The Stedi 2 to 1 Deutsch Connector Splitter allows the connection of two accessory lights using one of our wiring harnesses. DT2 Connector has a current rating of 15A, if your lights have a higher current requirement than 15A, we suggest you purchase our...- $29.75
- $29.75
- Unit price
- per
