-
Stedi Surface Mounted Twin Gauge Holder
Surface Mounted Twin Gauge Holder Gauges have 360 degree rotation for vertical and horizontal mounting Surface mounted pod Key Measurements Gauge Diameter 36mm Overall height 50mm Overall width 99mm Overall depth 79mm- $15.25
$16.95- $15.25
- Unit price
- per
-
Stedi JB74 Jimny Dynamic LED Side Marker
A completely sealed plug-and-play retrofit LED to replace the oranged lens halogen side marker indicator lamps to suit the Suzuki Jimny models vehicles listed below. Dynamic amber LED flows when the indicator is active. Install is plug and play can be done in under 5...- $40.50
$45.00- $40.50
- Unit price
- per
-
JB74 Jimny Rhino Hoodie
ABOUT THE ZT467 MULTIPOCKET HOODIE The ZT467 Unisex Multi-pocket Hoodie is warm, comfortable and loaded with functionality! A shoulder pocket for your pen/pencil and the extra pockets either side of your main pocket means this hoodie can hold all the essentials of the job. ...- $75.00
- $75.00
- Unit price
- per
-
Stedi VICE Bull Bar Tube Clamps
The STEDI Vice Clamp Bull Bar Brackets will meet the versatile application when it comes to side mounted & certain lower mounted LED light Bars. Made from cast aluminium with stainless steel fasteners keeping it strong yet light weight as well as a polyester...- From $34.65
$38.50- From $34.65
- Unit price
- per
-
Stedi Rally Bar to Suit Ford Ranger/Everest Light Mounting Bracket
Not everyone wants a bull bar, and nudge bars are, well, ugly. Enter the STEDI Rally Bar. Featuring a powder-coated 60mm mounting tube made out of durable 2mm stainless steel, this lightweight nudge bar can securely hold up to 30kg without any compromise. The...- $355.50
$395.00- $355.50
- Unit price
- per
-
Carbon Offroad Shinbusta Forged Recovery Hook
Get your recovery done faster with a Carbon Shinbusta Recovery Hook! This is an absolute beast of a recovery hook. Specs. 8000kg Rating Capacity Destruction tested to 16000kg by Nata accredited testing agent (Mech Test Brisbane) WLL - 4535 kg (WLL= Working Load Limit this is a rating for continuous use) Made from...- $109.50
- $109.50
- Unit price
- per
-
ECU Remap for a 7% Improvement!
You send us your ECU and we'll have it remapped with a copy of our dyno tune to gain 7% more power. Full details about this tune are in this post: https://jimny.co.nz/blogs/build/now-with-7-more-power. You need to send us your ECU, which we will update and send...- $1,295.00
- $1,295.00
- Unit price
- per
-
LED Light Bar Bracket to suit Rhino Rack Platform V2.0
We may be a little biased, but we think this is the sleekest Rhino Rack™ LED Light Bar mounting solution on the market. Designed by STEDI specifically to suit the Rhino Rack™ Pioneer Platform. This is a 100% bolt-on solution that supports a very...- $132.75
$147.50- $132.75
- Unit price
- per
-
Stedi ST3303 and ST3301 Pro Coloured Caps
Colour Caps to suit ST3303 & ST3301 PRO LED Lightbars ONLY.Coloured Cap Kit to fit both ends of 1 x ST3303/ST3301 Pro Lightbar WHAT'S INCLUDED 2 x PRO Colour Caps | User Selected TECH SPECS COMPATIBILITY STEDI ST3303 Pro & ST3301 Pro Light Bars ONLY- $17.55
$19.50- $17.55
- Unit price
- per
-
Stedi ST3303 Pro Blackout Cover
Optional blackout cover for STEDI ST3303 Pro LED Light Bars - STEDI logo print Available in the following sizes: ST3303 Pro 11 Inch ST3303 Pro 18.4 Inch ST3303 Pro 23.3 Inch ST3303 Pro 28.2 Inch ST3303 Pro 39 Inch Please Note: These covers are...- From $22.05
$24.50- From $22.05
- Unit price
- per
-
Stedi ST3301 Pro Blackout Cover
Available in the following sizes: ST3301 Pro 18.6 Inch ST3301 Pro 24.5 Inch ST3301 Pro 27.5 Inch ST3301 Pro 41 Inch Please Note: These covers are specifically designed to fit the STEDI ST3301 LED Light Bars ONLY. TECH SPECS COMPATABILITY STEDI ST3301 inc PRO Series Light...- $23.85
$26.50- $23.85
- Unit price
- per
-
Stedi Surface 5700k LED Rock Light
Auxiliary reverse assist, caravan, ute canopies, toolboxes or camper trailers. The ultra-wide emitting angle makes our LED ROCK lights the most versatile product in our entire range. Each STEDI LED Rock light draws a tiny 0.4 amp, yet produce 813 Lumens each. Making them...- $42.08
$46.75- $42.08
- Unit price
- per
-
Stedi Square Type Push Switches
The Stedi square 22 x 22mm Push latching type switch designed for the new incoming Toyota models like the Toyota Land Cruiser Prado (GDJ150R, second face-lift. These switches fit the Stedi Switch Panel for Ranger/Raptor/Everest perfectly. KEY FEATURES Ice Blue LED Back Lighting - Exact...- From $4.95
$5.50- From $4.95
- Unit price
- per
-
Stedi Boost Integrated Driving Lights for Type A Fog Lights
Stedi have designed an integrated driving light that effortlessly bolts up to your car's factory fog light mounts. Thanks to CREE's XHP 50 emitters, our all-new BOOST LEDs are capable of a peak beam throw of 311m @ 1 Lux and an impressive 1400 tested...- $267.75
$297.50- $267.75
- Unit price
- per
-
Stedi Tall Type Switches to suit Toyota
Our range of Old Style Toyota Push Switches maintain the factory look and feel of your vehicle with a wide variety of prints from LED Light Bars & Air Compressors to Diff Locks and much more. Our OEM Push Switches have dual illumination lighting...- From $24.75
$27.50- From $24.75
- Unit price
- per
-
Carbon Offroad Stainless Steel Pull Up Number Plate Bracket
Looking for a durable and convenient way to mount your number plate during a winch recovery? Look no further than the Carbon Offroad Stainless Steel Pull Up Number Plate Bracket! Compatible with both alloy hawse fairleads and roller fairlead mounting systems, this bracket allows...- $95.00
- $95.00
- Unit price
- per
-
KYB Skorched4's Heavy Duty Shocks for Suzuki Jimny (JB74)
Upgrade your Suzuki Jimny with KYB Skorched4s Shocks, the best aftermarket shock option for a firmer, more direct driving experience—both on and off-road. We've tested numerous shock options, and KYB Skorched4s stood out as the best for overall performance, stability, and comfort. Whether you're driving...- $1,195.00
- $1,195.00
- Unit price
- per
- Choosing a selection results in a full page refresh.